Binding program on the hot melt Adhesive machine safety introduction

"Huicong printing" binding method of hot-melt glue coating machine, use the process accidentally scalded takes place, so it can be important for you personally to elaborate on the protected use of hot-melt glue coating machine, hot melt machine maintenance and repair measures:

1. normally put on safety gloves, goggles and extended sleeve function clothing and to avoid scald by the liquid hot-melt adhesive or scald by EPE Hot Melt Glue Machine the components.

two. disassemble the Control Panel, before any protective cover or replace electrical components on the machine, you should initial get rid of the external energy supply, as a way to avoid danger, resulting in unnecessary loss of life and damage to the machine.

three. loose or lock the pressure connector, connecting mechanism (which include removing the combination junction with pipe insulation or combination of filters by a plastic circuit boards removed), you have to initial carry out relief perform, so as to avoid scald danger.

4. when removing chain gear unit's protective WPC foam board machine cover, turn off the motor switch, cease the motor and stay away from accidentally dipped a finger involving the chain and sprocket, cause harm.

five. do not use a flame torch to touch hot melt Adhesive components for heating, in the event you carry out maintenance and repair components, and if heated cleaning becomes required, you have to use the electric oven, utilizing circulating fluidized transport hot air grilling components inside the box or making use of the hot air gun bake.

6. cleaning solvent for carbon-hydrogen chloride is an exceptionally hazardous, if made use of to clean the PS Foam Sheet Extrusion Line plastic components of your program may happen a violent explosion.